Harken 60mm Protexit Single Thru Deck Block
UTGÅTT
För automatisk leverans av den här produkten välj intervall nedan och tryck på köpknappen. Du får varan levererad omgående och sedan samma datum varje period tills du väljer att avsluta prenumerationen. Läs mer om prenumerationer.
When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum Trissas rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Trissa Ø (mm)60 mm
Längd (mm)129 mm
Vikt (g)179 g
Maximum line Ø (mm)12 mm
Fasteners (mm)6 FH mm
Fastener spacing (mm)105 mm
A (mm)24.3 mm
B (mm)84 mm
Maximum working load (kg)1200 kg
Breaking load (kg)2400 kg
Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks. Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.
Produktomdömen och recensioner är viktiga verktyg för Happy Yachting i syfte att informera och inspirera våra kunder.
Vårt huvudfokus är att ha transparenta och relevanta recensioner om vårt produktsortiment.
Läs mer i vår recensionspolicy.
till i din varukorg.